• 
  Precautions for using heat transfer printing film

  23-07-29

   The heat transfer printing film can be printed on the printing machine after the materials are fully prepared. Generally, the release layer, printing layer and adhesive are coated and printed on a unified gravure printing machine. Unwinding: Mount the base film in the center of the unwinding roller, pass it between the impression roller and the plate cylinder, and then pass through the constant t

  READ MORE
• 
  What are the items that are not suitable for silic

  23-07-20

  Some printing substrates are made of raw materials that are difficult or impossible to apply to the thermal transfer printing process. For example, stainless steel materials without spray paint, wood without topcoat, substrates with two-component paint sprayed on the surface, silicone materials, substrates that cannot be heated or compressed, low-pressure materials for blow molding, etc. Shap

  READ MORE
• 
  What are the precautions in the thermal transfer p

  23-07-01

  What kind of cleaning should you pay attention to when using thermal transfer processing: Keep the workbench, guide rollers, buttons and other parts of the machine clean and free of oil and other stolen goods. Keep the flower film clean and free of oil, fingerprints, dust, etc., and keep it clean. The glue head should be clean, and no dirt or burnt particles should stick to it. The operator's hand

  READ MORE
• 
  What are the reasons and solutions for blurred edg

  23-06-19

  Patterns are common in daily necessities, wearables, decorative items, works of art, etc. One is for the beauty of the items, and the other is because people have different needs. With the development of our country and the increase in people's vision, textile heat transfer printing Processing printing uses this technology on most supplies. The products of this technology are rich in color and

  READ MORE
• 
  Precautions for using thermal transfer film

  23-06-11

  Thermal transfer printing is a commonly used printing method. Although thermal transfer printing is good, there will still be some problems during use. In this issue, we will discuss some solutions to some common faults of thermal transfer printing machines! In the process of using the heat transfer machine, you need to have the correct operation method. When you operate the entire equipment corr

  READ MORE
• 
  Precautions for the production of heat transfer pr

  23-06-08

  The heat transfer printing film can be printed on the printing machine after the materials are fully prepared. Generally, the release layer, printing layer and adhesive are coated and printed on a unified gravure printing machine. Unwinding: Mount the base film in the center of the unwinding roller, pass it between the printing roller and the printing plate cylinder, and then pass through the cons

  READ MORE
• 
  Thermal transfer film composition and analysis

  23-06-02

  There are several layers involved in thermal transfer printing. The base layer is the carrier coated with release agent, ink and adhesive. The carrier is required to be temperature-resistant, pressure-resistant and have small tensile deformation. The release layer is a coating of eleven layers of release agent that remains solid at room temperature and can melt at a certain temperature. The bondin

  READ MORE
• 
  Thermal transfer film uses and precautions for use

  23-05-25

  The electroengraving plate for printing flower films is mainly used for pictures and texts with transitional colors and rich layers. It can reproduce the effects of characters, landscapes and high-end pictures and texts. The printed pictures and texts are clear, accurate and have strong adhesion ability. They are suitable for large batches. , high-demand plastic products, cultural and educational

  READ MORE

CATEGORIES