• 
  Common problems and solutions during thermal trans

  23-03-08

  When printing manufacturers perform thermal transfer processing, the underlying lining material (cotton cloth, sponge, cardboard, etc.) absorbs ink moisture during the transfer process, which will cause excessive water vapor to be generated during transfer, causing it to be transferred to the cloth. When printing, the color of the pattern will become lighter or local aerosol or water streak interf

  READ MORE
• 
  Some preparations before printing for heat transfe

  23-01-12

  The heat transfer film is generally composed of four layers: the substrate (blank transparent film) layer, the release layer, the printing layer, and the adhesive (glue) layer. Base layer: refers to the carrier coated with release agent, ink, and adhesive, which requires temperature resistance, pressure resistance, and small tensile deformation. Generally, PET and OPP films are commonly used. Rele

  READ MORE
• 
  Metal substitute + versatile packaging production

  22-08-17

  In 2012, the 18th National Congress proposed a new concept of building a beautiful China, which not only reflects the people's pursuit of beauty, but also the requirements for green environmental protection in life. Especially in daily home life, this pursuit and requirement have become particularly obvious. As a new type of label material, in-mold labeling is also an environmentally friendly mate

  READ MORE
• 
  Advantages and applicable industries of in-mold st

  21-09-09

  In our lives, there are many labeling methods, and in-mold labeling is a very good method now. Today I will introduce to you some of its basic knowledge. Let’s take a look at the basics of in-mold labeling. An introduction that makes knowledge more convenient to use.   1. Product advantages:  1) Play an anti-counterfeiting role, improve product quality,   2) The labels are more colorful a

  READ MORE
• 
  What is the labeling process of in-mold labeling?

  21-07-11

  In-mold labeling is a method that is mainly used for labeling blow molding and injection molded products. Many people may not know much about it. Here, let me explain to you the labeling process of in-mold labeling. . The printed film or paper in-mold labels (divided into front labels and back labels) are stacked in single sheets and placed in the label libraries on both sides of the in-mold label

  READ MORE
• 
  Introduction to the applications and advantages of

  21-05-09

  Introduction to the application and advantages of in-mold labeling. In-mold labeling is a labeling method often used abroad. It has not appeared in China for a long time, but it is liked by many people. Let us take a look below. Introduction to the applications and advantages of in-mold labeling.   1. Engine oil industry: including plastic container packaging of lubricating oil, gear oil, antif

  READ MORE
• 
  Advantages of In-Mold Labeling

  21-02-22

  In-mold labeling materials are required to have good printability: the selection of in-mold labeling materials is very demanding. Ordinary label synthetic paper has poor surface smoothness, low strength, small elastic deformation, and difficulty in high-grade color printing. Suitable for large-area applications of barrels. Paper labels are easily deformed when exposed to water or moisture and redu

  READ MORE
• 
  What are the applications of special-shaped bags?

  20-09-26

  Analysis on the design and application of special-shaped bags. With the continuous development of science and technology and the improvement of manufacturing technology, some special-shaped bags have emerged that meet market demand. They have attracted the attention of many consumers with their novel and unique shapes and convenient and reliable functions. Breakthroughs It overcomes the limitation

  READ MORE

CATEGORIES