• 
  let you now how to pack hot stamping foil

  18-07-01

  Whether it is a 0.64cm wide film or a 1.26cm wide film, in order to ensure the safety of the film during transportation, We pack them in a vertical manner, even if it is difficult to pack. If the hot stamping foil is loaded in a horizontal manner, it may cause the film to adhere after a long logistics transportation process, especially for sea transportation. Our standard packaging for

  READ MORE
• 
  do you know what is pet hot stamping foil?

  19-01-11

  Hot stamping foil is the medium material of the hot stamping process. The decorative pattern on the hot stamping foil is transferred to the surface of the decorative substrate by one-time heating to form a high-quality decorative finish. During the stamping process, the protective layer is separated from the PET film by heating and pressurization, and the hot melt adhesive permanently adheres the

  READ MORE
• 
  How to get the best results in the production proc

  19-02-02

  How to get the best results in the production process? 1. All substrate surfaces must be polished and smooth, free of dust, pinholes, etc. 2. The rubber roller should be centered on the substrate as much as possible 3. The rubber roller should be cleaned before heating. Do not use hard, sharp objects to clean the rubber roller. 4. The stamping speed, stamping pressure, and stamping tem

  READ MORE
• 
  In-mold film

  23-02-01

  In-mold film 1 In-mold film process application In-mold film, also known as in-mold labeling (IML), is a kind of in-mold decoration process. It is a plastic decoration technology that uses the temperature, pressure and a certain time of plastic molding (including injection molding and blow molding) to simultaneously attach functional layers, structural layers or decorative layers in the mold.

  READ MORE
• 
  OPP in-mold film

  23-01-01

  OPP in-mold film 1 Concept of OPP in-mold film OPP film, a film made of polypropylene, is scientifically called polypropylene film. It is usually referred to as PP film. OPP film is colorless, odorless, tasteless, non-toxic, and has high tensile strength, impact strength, rigidity, toughness and good transparency. Due to its excellent properties, OPP film is widely used by thermal transf

  READ MORE
• 
  Plate in-mold laminating process

  22-12-27

  Plate in-mold laminating process 1 Application of plate thermal transfer process At present, the plate thermal transfer process is mainly used on plastic plates. According to the different transfer processes, the commonly used plate thermal transfer processes can be classified into two types: ordinary thermal transfer process and thermal transfer derivative process - in-mold laminating proc

  READ MORE
• 
  Concept of IML

  22-11-15

  1-Concept of IML IML is a kind of thermal transfer film. It places the prepared film on the specified position of the substrate and forms a layer of exquisite patterns on the surface of the product through the heat and pressure of the blow molding equipment. IML plate effect diagram 2-Features of IML 1. IML can be used in daily necessities, daily chemical manufacturing products, food packa

  READ MORE
• 
  Three things to note about in-mold stickers

  22-09-07

  【Thermal transfer analysis】Three things to note about in-mold stickers 1-Dust In-mold stickers are a type of thermal transfer technology. The raw materials, processes, and application methods used are quite different from ordinary thermal transfer processes. What should be paid attention to in-mold stickers during production and processing? The following is a brief introduction for you. Dust

  READ MORE

CATEGORIES